Home \ Contact Us

News
How Check Valve Works
Datetime: 2016/5/6 16:20:12  Hits: 10624

WFE API Swing Check Valves 3D Demonstration


Check Valves, also known as non-return, one-way, and clack valves, are different from other types of valves in their ability to pass fluid in solely one direction. This sort of function is essential for a variety of safety applications, as well as for preventing overflow.


How Check Valves Function


Operating on a two-port system, check valves have an opening where fluid or gas is drawn in to the first port. It is then regulated by a mechanism separating the two ports that allows water to be drawn from the first to the second port and out an opening without allowing fluids to reenter the first port.

Types of Check Valves


Ball Check Valve


This check valve uses a ball covering a round opening to separate the first and second port. When fluid is drawn in, the ball is pushed forward. When the fluid is pushed back, the ball is pressed into the round opening, which creates a seal and allows all fluid to flow out the second port in the intended direction.

Swing Check Valve


One of the most common types of valves, a swing check valve is used inside household toilet tanks, as well as in many other areas. Instead of a ball controlling flow, this valve uses a small door on hinges that opens when water is drawn in and closes when the flow of water is stopped, thereby not allowing any fluid to drain out of the valve’s entrance. This type of valve is also sometimes referred to as a tilting disc check valve.

Disc Check Valve


A more complex check valve, it functions with a disc mounted on a spring. Pressure from the inlet opens the disc by stretching the spring. When the flow stops, the spring is compressed, and the disc returns to the closed position.

Split Disc Check Valve


Also referred to as a dual plate check valve, it operates with a door that is split down the middle and only folds one way to regulate flow. When fluid enters the valve, the pressure causes the hinges of the door to open. When flow is stopped the door is shut.

Diaphragm Check Valve


A flexing rubber mechanism is used to regulate the flow of water on this check valve. It is activated when pressure on the upstream side is greater than that of the downstream side. When the pressure returns to a certain level, the rubber diaphragm flexes back into the closed position. An advantage of this type of check valve is the option to choose the pressure differential that controls the diaphragm for a variety of applications.

Wafer Check Valve


These kinds of valves can work with a swing, disc check, split or other mechanism to regulate flow. The wafer check valve differs in its small size that allows it to fit between a set of flanges.

The above are just some of the most common types of check valves used in industrial applications, with many more available and future developments in the works.


Reference Sources:


http://en.wikipedia.org/wiki/Check_valve

http://empoweringvalves.com/check-valves-function-selected-valves-types/
Contact Us
  • Winning Fluid Equipment
  • Add: Lianxin East Rd 61#, Oubei Town, Yongjia County, Wenzhou, Zhejiang P.C. 325100
  • Tel: +86 (577) 5775 5599
  • E-mail: sales@wfecn.com
  • Mobile: +86 137 3696 6003
  • Whatsapp

    Wechat

HomeAbouts usProductProduct videosNewsContact Us

Copyright 2021 © Winning Fluid Equipment. All Rights Reserved.

Powered by: Otree Privacy Policy

Whatsapp

Wechat

sales@wfecn.com